SmartCJ Wiki - en

about_rotation

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:14+00:00

About Rotation Well, what is rotation ? It's a process that helps you to show best thumbs at your index page. Basically what you have to do is to add thumbs and script will select best of them and create index page with these thumbs. SmartCJ rotates thumbs based on link (&link= parameter) stats. This kind of rotation doesnt load your server and doesnt slow down your site. Let's see what happens when you use external rotator:

add_trade

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:14+00:00

Adding a trade Actually all things here exectly the same as at Edit Traders but pay attention to Settings → NewTrader item - every new trader will get these settings by default.

admin_area

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:14+00:00

Admin Area Notice that traders in admin area can be sorted in every field. To do this click on the headline of the field you need.

affiliate_program_intergration

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:16+00:00

Affiliate Program Intergration NudeVista NudeVista is an adult search engine for XXX photos, video galleries, tube clips and pornstars. Based on its own galleries’ database and spidering reliable TGPs and Tube sites, it offers the most relevant and up-to-date search results.

analize_3

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:16+00:00

Analize 3 Here we analyze traders on several parameters: Refs\ Browsers - analyzes the trader’s statistics on the subject of prevailing the same refs or browsers. Normally there have to be different refs in trader’s refs not only the domain’s root. If in refs 99%

anticheat_settings

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:16+00:00

Auto AntiCheat This system can automatically switch off traders due to some reasons : System works - systems on\off :) Incoming : dont count every IP that appears more than X times during last Y minutes - for example some bot makes 20 hits during 10 minutes , script will not count 21st hit and so on for the next 10 minutes. After this time this IP is released. Notice: user with this IP still see your page and for him everything is as usual.

autoanticheat

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:18+00:00

Auto Anticheat Auto Anticheat System allows to switch off traders automatically using following parameters: * Proxy % - if proxy % is more than X ( recommended more than 30) * Productivity off - trader’s productivity * Cheat Signs % - recommended 15 (look Cheat Signs)

blacklist

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:20+00:00

Blacklist Blacklist protects you from registration from domains you wouldn’t like to trade with. Here the usage of * is permitted. For example * *.yourdomain.com - to forbid registration from any domains subdomains yourdomain.com * *.*.com - to forbid registration of domains of the 3rd level.

cheat_signs

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:20+00:00

Cheat Signs This is suspicious clicks. * clicks made too fast * clicks with wrong cookies

checker

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:22+00:00

Checker Checker helps you to check trader’s page automatically and search there for banned words. Check Time - time (minutes, hours) when the traders’ pages have to be checked. Example: 14:15,17:20,20:21,23:13,22:10 Elements we are looking for : opener, popup, object and so on

cj_pages

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:22+00:00

CJ Pages This is a list of your main pages. Take a look at Start Here

cj_settings

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:22+00:00

CJ Settings Most of the options here are quite clear and don’t need additional explanation. But still some of them need detailed discussion. Counted clicks Max – the maximum amount of clicks, which can be counted to 1 serfer. That means that the following clicks go to where they have to be sent but are not reflected in the statistics.

colors

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:24+00:00

Admin Colors You can change the color of any column in admin area (Trade Screen). For example, you can set comuln 'Daily Uniques' to be yellow, that makes Trade page more attractive and comfortable.

comments

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:24+00:00

comments here !!!

config_files

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:26+00:00

Config Files You can edit config files for example, user agents scrips uses visiting other sites, languages, list of SE domains (to detect SE hits) and so on. In most cases you dont need to change anything here :)

cron_crontab_settings

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:26+00:00

Cron Settings Crontab - is a part of any *NIX OS. It runs some programs at defined time. Smart Trade Script uses it to collect and optimize stats If you see notine “check crontab” in Main tab that means you have to check crontab . It should be like

custom_galleries_and_google

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:26+00:00

Custom Galleries and Google Usually you have a link to custom gallery like /gallery/galery_desc_bla-bla/123455/index.html For rotation purposes we add so called 'rotation parameter' /gallery/galery_desc_bla-bla/123455/index.html?1x2x1234 where 1x2x1234 is changeв from time to time

custom_galleries_templates

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:28+00:00

Custom Galleries Templates Tags for templates , full list New Rotation Templates

delete_trades

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:28+00:00

Delete Tradest While deleting a trader you can come across different options. -Just delete it -Delete and add to blacklist, so that the trader couldn’t be registered once again. Usually the reason of adding the trader to blacklist is mentioned.

direct_out_links

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:30+00:00

Direct Out Links Direct Links example out link
direct link

edit_traders

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:30+00:00

Trade Edit Personal Data – personal trader's data and signup IP. domain: the domain of the site you're starting a trade with. url: the url where you're going to send traffic to. The domain must appear in the url. icq: the icq number of the other webmaster. if you select 'icq option' at Settings

external_thumb_rotators

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:30+00:00

External Thumb Rotators If you decide to use external rotators take a look at these hints Smart Thumbs 1. Settings -> General Settings Set: Url encode / encrypt URL - No Thumb trade script urls: /out.php?url=#url#&p=#skim# 2. At this point you have 2 options

faq

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:32+00:00

FAQ Skimming 101 We have a conception of 101 skimming. Yes, skimming can not be more then 100% so 101 means = default skimming. Ie if you set skimming 101 for SE hit and you have default skimming 60 - so SE surfers will get skimming 50 too. Last Clicks

fast_trade_add

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:32+00:00

Fast Trade Add Allows you to add trade without lots of copy\paste operations. Owners of other trade script, please, add this feature to your scripts. With this easy JS script and very simple data structure it gives you great opportunities. Here is an example of trader's data:

first_click

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:34+00:00

First Click This is very usefull parameter if you operate TGP site. First clicks means that if surfers clicks on a link with content for example, out.php?url=http://gallery.com/post.html and this is his first click on your site - script always sends him to content..

forces

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:34+00:00

Forces Fast Force – Script tries to give away these hits as soon as possible , giving the highest priority to the trader. Hour forces - script tries to give the pointed amount of hits to trader per hour. There's also limited (special) hour forces - that limits hour forces by time, for example 'force 50 hits per hour during 10 hours'.

galleries

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:34+00:00

Galleries This is an easy way to create TGP site. For example, you have a great number of links (a list of FHGs from 10 sponsors). You can place a lot of links with the same description like Teen gallery with the same link like /out.php?url=file&filename=teen.url. Create file teen.url in

gallery_checker

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:36+00:00

Gallery Checker You can find Gallery Checker in Rotation - Tube - Gallery Checker. Every minute script checks Х (Amount of galleries to Check Per minute(!) ) from DB, note each minute, at each domain, so if you have 5 domains with SmartCJ - it will be for example 5 a minute * 5 domains = 25 galleries a minute.

global_admin

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:36+00:00

Global Admin This is a network management tool also known as Multiadmin. First of all create any amount of site groups. It actually for your convenience only so you can create just 1 group. After that add sites , note that password field is NOT for your admin password (ie password for admin area), you have to type Exchange password from settings of each site.

groups

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:38+00:00

Trade Groups Traders can be divided into groups. Each trade can belong to one or several groups. Division of traders into groups is necessary to divide traffic if the traffic on your site consists of different niches. For instance, if you have teen and mature traffic on your site(which is rather an extraordinary case), you can divide traders into 2 groups and point parameter group=mature

hidden_links

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:38+00:00

Hidden Links Hidden links helps you to detect hitbot traffic. An example:

Enter

Regular surfer can not see this link as it's hidden under layer, but any bot what tries to click on your page can not detect that and this is how we gonna catch some hitbots

hints

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:40+00:00

Hints PHP Includes Some people include files like include(''); or virtual('/scj/top/top.html'); or readfile('') moreover they use it may times per page. You should NOT use it. Why: PHP creates page BEFORE user gets it. So if you have something like include('

imagemagick_strings

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:40+00:00

Imagemagick Strings Imagemagick is an utility used to create to create thumbs, it have maybe parameters and options, you can take a look at full doc at imagemagick.org, so you can edit Crop Profiles in script and set your own parameters for IM to get better thumbs.

import_replacements

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:40+00:00

Import Replacements Rotation - Settings - Import Replacements you can add autoreplacements that will be used always when you import something, that means both Import and ImportSets and even TubeImport. This is very useful to remove\replace some text in import, for example size of embedded video or some text in gallery description.

import_sets

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:42+00:00

Import Sets Various sponsors provide URLs in various formats: RSS (and some sponsors use nonstandard fields), XML, dump. Before update 47 you could add only standard RSS feed and It was inconvenient for automatic feeding of you site. Import Set introduced for take care of this. With Import Sets you can automatically import galleries from virtually any source with any options including Custom Galleries, additional thumbs and so on.

import_thumbs

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:42+00:00

Import Thumbs All fields are self-explained hopefully, i just have to notice 'Copy thumbs' option : 'copy thumbs' means script wil try to download and save to your location (Rotation Settings Graber Save Settings), otherwise - script will hotlink thumbs.

import_traders

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:44+00:00

Import Traders This option is self-explained but i'd like to notice that script can automatically import trades from other scripts (like proton,ats,atx and so on)

incoming_traffic_counting

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:44+00:00

How should the hits be sent to me? Usually everybody sends hits right to the domain’s root, i.e. http://mytgp.com, script takes trader’s domain from the referrer. But in certain circumstances hits can be sent through http://yourdomain.com/?id=trader.com

incoming_traffic_redirect

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:46+00:00

Incoming Traffic Redirect Incoming This option allows you to redirect incoming hits based on referer, IP and so on. Virtially - anything. Notice that this works only if you user Advanced method (Start Here) ie with original SmartCJ index.php. Options: Var - script checks this variable It ccan be HTTP_REFERER, HTTP_ACCEPT_LANGUAGE or GEOIP_COUNTRY_CODE and so on. Value - value of this variable (google.com for example) Redirect

installation

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:46+00:00

Installation * You'll need Mysql DB and SSH access to your server * Download install * upload (install_scj.php) to the rott of your domain * Run install_scj.php in ssh (shell) (php install_scj.php) * That's all Note: new intsall ( starting with update 48) also support command line options

ip2lng

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:46+00:00

IP 2 LNG Shows the ratio of hits of a certain country (by GeoIp) and the amount of hits (by browser’s language). For example if a trader has 90% of en-us language, but at the same time the amount of the USA traffic is 10 % (by IP)- it is more likely to be cheater.

layouts

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:48+00:00

Layouts You can change look of Trade screen: select which columns to show , colors and so on. Later in trade screen you can switch between layouts on-the-fly.

link_diff

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:48+00:00

Link Diff This method of finding cheaters is based on link parameter. You add an ordinary parameter &link= in each link on website and stats show that lets says serfers click on link1 - 35%, link2 - 20% on the average and so on. If the personal statistics of a trader differs a lot from the average statistics on site – it’s a good reason to take a closer look at this trader. Discrepancy parameter means what the difference between trader’s statistics and the site average s…

list_galleries

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:50+00:00

List Galleries Thumbs currently shown on any page (Rotation Pages) are marked with grey color. Just for info.

maintainance

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:50+00:00

Maintainance Logs All tech logs of script are cut up to X lines CJ Settings Backup and Mysql Backup What's difference between 'em ? Old Backup is for back-compatibility only so basically you wont need, I use it to transfer trades from very very old versions of SmartCJ.

multiniche_sites

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:54+00:00

Multiniche sites Here is a short todo list for new multiniche sites * Create Groups (Trade -> Groups), all traders must consist in a least one group * Create page (it depends on your thumbs rotator, If you use internal rotation - Rotation->Pages) and add include

mysql_tunning

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:54+00:00

Mysql Tunning If you use only trade part of the script - it's not really important. Trade part doesn't really load mysql. This article is for those who use built-in rotation, especially with big databases. Mysql, as almost any other DB, stores data on disk. Disk operations are slow (compared to in-memory operations) and that's is why very important to use indexes. There are basically 2 storage engines (mysql has more then 11 actually but only 2 are important in our case) - MyISAM and InnoDB.

new_rotation_content

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:56+00:00

New Rotation Content How to add content , create different types of galleries. You can see demo of all types here , you can also use all types of galleries within one site. Reminder: embedded galleries (custom galleries) - galleries created from some content at your server (your galleries), external galleries - galleries at other hosts (FHG for example).

new_rotation_faq

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:56+00:00

New Rotation FAQ Rotation - Groups shows that I have 10 galleries while Rotation - List thumbs - 20 Each gallery can be assigned to more then 1 group. You can notice it while gallery edit: there are 2 select fields for groups - main and ext. Rotation - groups counts using main group so we can see real amount of galleries in DB, while Rotation - list thumbs shows galleries using Ext groups , the way you'll see it on site.

new_rotation_hints

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:58+00:00

New Rotation Hints Setting GET parameters This is one the most important things to understand. As mentioned in How it works all the ages are not static, but generated 'on-the-fly' by the same script and you get different results based on request parameters and template. For example /scj/tube/index.php?group_name=phones outputs all images from 'phones' group, and /scj/tube/index.php?group_name=cars - from groups 'cars'. But on site you can use links like /category/phones/ and /category/cars/ - …

new_rotation_multidomains

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:58+00:00

New Rotation Multidomains Main purpose of this is to start multiply sites with different traders using the same thumbs DB. You can even run those sites on different servers. The process is easy: you create one site (master) and fill it with galleries\thumbs, after that you link other scj sites.

new_rotation_perfomance

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:31:58+00:00

New Rotation Perfomance With New Rotation you get a lot of pages. Old style rotation was like you create a finite number of pages (usually up to ten) Pretty common situation: 300 categories, 7 pages in each, 3 ways to sort galleries inside category (CTR, date, duration) - it's 6300 pages.

new_rotation_sphinx

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:00+00:00

Sphinx for Rotation\Tube sites Basically script uses mysql to search DB, but on large DB mysql too slow. + it doesnt use morphology. Sphinx (sphinxsearch.com) - is an open source full text search server, designed from the ground up with performance, relevance (aka search quality), and integration simplicity in mind. It faster then Mysql and deliver better quality of results.

new_rotation_step_by_step

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:00+00:00

New Rotation Step By Step There are 2 types of rotation: Old (Rotation - Pages) and New (Rotation - CMS). Let's say you have 2 categories. With old rotation you have to create 2 pages (category1.html and category2.html), while with new rotation you have to edit only 1 template - content_list and script will output thumbs for each category using this template. This is very important if you have lots of categories.

new_rotation_templates

Anonymous (anonymous@undisclosed.example.com) — 2016-05-31T07:57:54+00:00

New Rotation Templates Each template consists of 2 parts: template itself and subtemplate (sometime just 'sub' to be short). Template is a regular html page with special tags, so script takes your template, replace tags with actual content (lets say replace

new_rotation_troubleshooting

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:02+00:00

Troubleshooting Script does not count thumbs' CTR First of all - check if it counts 'shows'. If not - make sure you have rot_in.php in your templates. If there are 'shows' but no clicks - check that you have 'rotation parameter' in your links ( like 12x34x5678).

nginx

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:02+00:00

Nginx Nginx - is an HTTP-server, and in most cases it is faster then Apache. Common scheme now is front\back - nginx\Apache. Here are some error you can make in configuration Error 1 - the same IP address Trade script logs IP addresses and it's very important for script run by Apache to get real IP from nginx. So the first error is passing 127.0.0.1 or server's IP for all requests from nginx to apache.

optimal_settings

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:04+00:00

SmartCJ - руководство по оптимальным настройкам About it This article was written many years ago so it may content some outdated information but anyway you can find this information pretty useful. Right version of script

out_settings

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:06+00:00

Out settings Imagine the site that has one very strong trade and the rest of the trades are so-so. According to the priority this site will always be on the top position, whereas the rest of the sites will get the second, third and other positions. This trade will get almost all hits. To avoid this situation out settings exist. We take for example first 10 traders in the line to get a hit and we give a hit to one of this 10 at random. But to follow the priority ( the trader which is high…

out.php_parameters

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:06+00:00

Out Parameters Standard set of options. Base link is sent to trade /out.php?link=something Direct link to trader /out.php?member=trade1.com /out.php?member=trade1.com&url=http://member.com/nichepage.html Permanent link /out.php?link=something&url=http://realcontent.com

outgoing_traffic_redirect

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:06+00:00

Outgoing Traffic Redirect Outgoing Actually it's quite the same as Incoming but for clicks. Example: var = HTTP_REFERER value = yourdomain.com click = 3 Redirect URL = http://sponsor.com/redirect 3rd click to sponsor

password

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:08+00:00

Password Protects your admin area. Basically your scj/admin folder is protected with so-called Apache authorization. But you can switch on “multiaccess”. Thus you can create a list of users with different access rights for example access to rotation menu only.

path_and_url

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:08+00:00

PATH and URL It's a bit astonishing but looks like some people confuse URL and PATH. URL - is something like , ie a place on the internet PATH - is a position of a file on a disk For example Usually domain's folder at your server has a path like /home/user/domain.com/. Let's say there's a file named 1.html. It would have a PATH /home/user/domain.com/1.html and

priority

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:10+00:00

Priority Priority is the immediate importance of the trader , i.e. how important it is for us to give it hits.

quality_settings

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:10+00:00

Quality Settings To get a full quality assessment of the traffic from trader Quality Settings exist. For example, if a trader sends you Chinese or Russian traffic you can not count such clicks or count them with discount. You can also do the same thing when counting clicks through proxy and with JS turned off.

rare_links

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:10+00:00

Rere Links It is also intended for analyzing links, to be more exact for searching and finding some rare or vise a versa required links in traders’ links. For example, place hidden links (w\o description or hidden under div\layers). In Req. Links : enter links (hidden_link, one per line) and script will show who has or doesn’t have these links in logs.

reports

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:12+00:00

Reports The best helpers in finding out exploits and other trash on traders’ pages are your serfers . When surfer clicks on a link ( through out.php) script saves last url using cookie. Put a link like Report Bad Site

rotation_crop_profiles

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:12+00:00

Crop Profiles Each profiles allows you to process thumbs in unique way. Lets say sponsor A has gallery with very bright images, while another has big logo and it's not acceptable for thumbs. You can setup separate profile for each sponsor and forget about it.

rotation_graber

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:14+00:00

Rotation Graber There are 3 schemes for grabber: * Grab too Preview - grabber takes X random thumbs from gallery and adds them to Preload , later you can select thumbs there and add them to DB (Pull) * Take 1 random - takes 1 random thumb and adds it to active thumbs.

rotation_groups

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:14+00:00

Rotation Groups It's useful if you run multiniche site. Actually what you have to notice in Groups is Shift parameters. There 2 of 'em: Shift Period (hours) and 'or Shift Period (Clicks)'. This is a period for Shifts (About Rotation). Reset all stats on reset - Reset thumbs stats on Shift (most likely you dont need it)

rotation_pages

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:16+00:00

Rotation Pages Template is a regular html with special tags which are replaced by actual thumbs. Upon creation of template try to image whole page as a table and add rows\cols numbers (it's just for your future conveniences) First of all you have to add at least 1 subtemplate. Subtemplate - this is how each of your thumbs looks like.

rotation_rss_export

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:16+00:00

SmartCJ RSS 1. Create template rss (you can see it among default templates starting with undate 47 ): example and subtemplate like it should be for rss file  http:///gallery///index.html /gallery///index.html" target=_bla…

rotation_settings

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:18+00:00

Rotation Settings Rotation period can be based on * Refresh (Rotate) thumbs every X minutes * or every X clicks If you want to rotate thumbs evey X clicks - set Refresh (Rotate) thumbs every X minutes = 0. If there are some numbers in both fields - script will use each. For example, Rotate every 5 minutes and 200 clicks, during 5 minutes you've get 120 clicks - script will do rotation.

rotation_specials

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:18+00:00

Rotation Specials Update galleries' alt tags with random words from file (ie set alt as X random words from file) Interesting to try function: script takes words from file, create random phrases and saves as alt for thumbs. Well, i'm not sure, but i think it could get you some hits from SE.

rotation_sponsors

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:18+00:00

Rotation Sponsors Add your sposnors here. Things to know: * You can deactivate sponsor and all it's galleries will be removed from site pages. Note, if you deactivate sponsor - galleries will NOT be deleted, if you delete sponsor - galleries will be deleted too.

rotation_step_by_step

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:20+00:00

Rotation: Step by step * About Rotation - Please, take a look basic ideas of rotation. * Check rotations settings - Rotation Settings * Add Rotation Sponsors * Setup\Check Rotation Crop Profiles * Setup Rotation Groups * Add thumbs: Import Thumbs, List Galleries, Rotation Graber + Rotation Preview * Create Rotation Pages * Activate Thumbs in Rotation Specials You can also setup Cell Stats but it's optional. Next step if to check that it works:

rotation_tags

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:20+00:00

Rotation Tags Each gallery has some tags. You can see a list of all tags in Rotation - Tags. If you do not assign tags during Import of galleries - tags will be autocreated using words from gallery's description. If a gallery has a tag , let's say 'car', that gallery will be shown on tags' galleries list (

script_messages

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:20+00:00

Script Messages If script have something to say - you'll see letter icon at the top left conner. Just click on it.

second_click

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:22+00:00

Second Click This parameter shows % of surfers who does more then 1 (or 2,3 and so on) clicks. Setup parameter `Next Click` in CJ Settings (it's 2 by default), add column 'Show next click' in CJ Settings -> Display Config.

server_moves

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:22+00:00

Server Move Script is bind to your current server, that means if you just copy all files to the new sever - it won't work. That's why you have to contact support and ask to install script on new server. It's free. If you need to transfer traders from old server to the new one here is what you can do:

server_requirements

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:24+00:00

Server Requirements SmartCJ requires: * any *NIX * FTP or SSH access to server * Mysql DB (name, login and password doesn't matter, you just have to know it ) * Zend Optimizer (free addon for php to burst perfomance)

sidebar

Anonymous (anonymous@undisclosed.example.com) — 2016-12-06T05:50:42+00:00

Documentation index * ReadMe * Installation * Start Here * Out.php Parameters * Incoming Traffic Counting * Things To Know * FAQ * Troubleshooting * Hints * Cron (Crontab Settings) * Nginx * PATH and URL * Mysql Tunning * Multiniche Sites * Direct Out Links * External Thumb Rotators * Affiliate Program Intergration * Updates * Subscription * Optimal Settings * Imagemagick Strings * modTOPList * Thumbs CMS * TCMS In…

signup_tickets

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:24+00:00

SignUp Tickets If your signup form is closed other webmasters have to contact you on icq or email and ask for a trade. But it takes time to add a trade (i meam open your admin area - add trade - copy\paste all fields from a massage). You can create signup ticket and let trader add himself.

smart_exchange

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:26+00:00

Smart ExChange This is a multiadmin interface for SmartCJ. It it very useful for managment of many (2+) sites using SmartCJ. This part of software is not released yet.

smoothness

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:26+00:00

Smoothness Shows the smoothness of the traffic from trader every hour.

start_here

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:28+00:00

The beginning If you are going to use internal rotation, please, start here New Rotation Step By Step If you gonna use trade only there are 2 ways to count hits Simple If you have many SHTML pages add this code after tag

start

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:28+00:00

SmartCJ Documentation SmartCJ is unique trade script and here is why : * Its fast, really fast. For example, pornhub.com has 8M unique hits a day, yourfilehost.com - 10M * Lots of handly AJAX features in admin * Unique features for multiniche sites like yobt.com

stats

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:28+00:00

Stats Referers, IP stats, links and even GEO stats.

system_trades

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:30+00:00

System Traders There are several system trades in the script. They are reflected in the second table, which is placed below the table with your trades. You can’t delete system trades. At present time we have : Exout – Can have outs only Noref

templates

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:30+00:00

Templates You can edit templates of different pages, the most interesting one is wm_signup.tpl – it’s a signup template for traders.

top_positions

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:32+00:00

Top Positions Script uses this data to determinate your position in trader's top. Usually you can see description of your site od your domain name in trader's top, so that's what you have to write down in this field (comma separated), for example : Best Free Site,bestfreesite.com

toplist

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:32+00:00

TopList There can be any number of toplists. Filename has to start with _ ( _ underlining sign ). While parsing, the script takes files with «_» at the beginning, then processes them and saves under the same name but without «_». That means that out of _top.html turns out top.html file. Afterwards this file can be included into the main page with the help of the include like this

trade_activation

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:34+00:00

Trade Activation Activates traders if it meets all conditions. Note: System activates traders from status 'No, till trade activation' ONLY.

trade_formula

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:34+00:00

Trade Formula Trade Formula – a formula used by script to calculate priority of each trade. Higher priority means more hits to this trader. Simplified view is presented by classic formula TOTAL_OWED*0.3 + HOUR_OWED*0.3 + HOUR_HITS*0 + HOUR_TRADE_PROD*0+ HOUR_PROD*0 + TOTAL_HITS*0 + TOTAL_TRADE_PROD*0+ TOTAL_PROD*0 + TOTAL_OUT2CLICK*0 + HOUR_OUT2CLICK*0 + TOTAL_RELOWN*0.6 + HOUR_RELOWN*0

traders

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:34+00:00

Traders You can see 5 letters next to each trader. They are E D F S C. Edit – editing of trader Delete – remove trader Forces – forces for trader Stats – trader’s statistics C – Color – the ability to mark each trader with its colour. Traders marked with yellow colour are the traders that have these or those remarks to script.

traffic_rules

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:36+00:00

Traffic rules Allows you to redirect incoming hits or clicks to certain urls depending on different circumstances. Incoming Allows you to set the rules for incoming hits, for example if you want to redirect some hits without making them come to the trade’s page. Note that incoming hits can be redirected only if you use the variant of setting off the hits with original index.php SmartCJ. If you count hits using include (), this optio…

traffic_sell

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:36+00:00

Traffic Sell You can automatically sell some clicks to broker. Sell URL - broker's url All Traders - default settings for all clicks. Notice there are 2 numbers - % trade clicks and % of content clicks (ie you set to sell 5% of trade clicks and 10% of url clicks. surfers make total 200 clicks - 60 to trade and 140 to content. Script will send (60*5%) 3 + (140*10%) 14 = 17 total to broker.

troubleshooting

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:38+00:00

Troubleshooting It doesnt work ! Contact me and explain problem, but first of all make sure : * You've done all update, may be your bug is already fixed * Take a look at FAQ and Troubleshooting * Please, give me as much details as you can.

ts_group_settings

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:38+00:00

TS Group Settings Import Galleries : Yes , SmartCJ will parse tube site and add thumbs to your DB. Import Thumbs : All - add all available thumbs, Main - only main thumb, this thumb is usually hand-selected by the owner of tube site and has good quality, but all other sites use it. There may be

ts_rotation_settings

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:38+00:00

TS Rotation Settings There is only 1 entry for us Synonymize descriptions ? - should script replace some percent (% of words to Synonymize) of words in description and title of each gallery with synonyms. You can find a list of synonyms in syn.txt (Settings - Config Files).

ts_sphinx

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:40+00:00

Sphinx for Rotation\Tube sites There is a good tool to search within big DBs - Sphinx. This a system to perform a fast search with morphological analysis of search query. Installation: * Ask admin to install sphinx itself (this is a separate application)

ts_templates

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:40+00:00

TS Templates (CMS Pages) Tube templates are based on regular rotation templates Rotation Pages, but there are 4 predefined template for tube stucture. Index - Index of your site. It shows list of of categories by default, but you can also show most popular thumbs for example.

tube_cms_pages

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:32:42+00:00

Tube (CMS Pages) Settings Redirects Redirect incoming hits to niche pages ? Based on Referer - SmartCJ can automatically redirect incoming traffic to appropriate category depending on a referrer. But for this feature to work name of your category should be somewhere in referrer. Ie if referer =

tube_import

Anonymous (anonymous@undisclosed.example.com) — 2018-02-27T06:57:52+00:00

Tube Import You can create a tube-like site within 15 minutes. That's really easy. Actually there are 2 types of content for tube-like sites: embed content and external galleries\movies. External galleries\movies is a type of content that is viewed at external site (regular gallery), embed content is a content that is hosted at external server BUT can be viewed within your pages (embeded into your page). With SmartCJ you can create any type of content.

updates

Anonymous (anonymous@undisclosed.example.com) — 2023-02-13T08:33:25+00:00

Update Updates help us and you to keep your copy up to date. Updates consists of some changes to DB and files reflecting new features in script. How to do update To apply an update to your script just click Maintenance - Update script * or run following commands in SSH

user_field

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:33:06+00:00

User Field Formula If you miss some trade parameter, for example you'd like to know ratio clicks to out for each trade, - this featue for you. You get direct access to internal variables. This formula only reflects a number or whatever but it doesn't affect trade.

user_vars

Anonymous (anonymous@undisclosed.example.com) — 2014-01-29T18:33:06+00:00

User Vars Very cool feature to detect checters, For example, 99% of hitbots can not emulate JS so what we have to do is count % of surfers w\o JS. Include following code into your page: